* Working prssure up to 6000 psig (414 bar)
* Working temperature: -28～482°C (-20～900°F)
* FT1, FT2, FT3 and FT4 Series
* End connection size: 1/8″ to 3/4″, 6mm to 12mm
* Stainless steel 316, 316L, 304, 304L, 321, 904L, brass material
* Multiple element nominal pore sizes for option
* AmsSystem standard cleaning
* Packaging: single bagged with inner box and outer carton
* Permanently heat code marked; traceable to original mill certificate of test
* Critical surfaces are 100% visually inspected using magnification and lighting
* All filters 100% factory tested and come with high-quality appearance

Send Inquiry by Leaving a Message

Description

Filtration Definitions: Sintered element: metal powder (alloys are available) is pressed in a die at sufficient pressure that the powder particles adhere at their contact points. Strainer element: the strainer is cup-shaped and includes an inner cup-shaped support structure having staggered perforations extending through the surfaces thereof, an outer cup-shaped strainer structure constructed of wire mesh is closely received over the support structure. Element nominal pore size: the element nominal pore size is normally calculated from the pressure required to cause air to bubble from the largest pore in the filter element when submerged in a test liquid.

Particulate Tee-Type Filters

FT1 Series

* Working pressure up to: 6000 psig (414 bar)

* Working temperature: -28°C to 482°C (-20°F to 900°F)

* End connections: 1/8″ to 3/4″, 6 mm to 12 mm

* End types: tube fitting, male/female NPT, BSPT, BSPP, metric thread

* Element nominal pore size: 0.5, 2, 7, 15, 40, 60, 80, 100, 150, 250 and 450 μm

* Sintered and Strainer element types for options

* Filtration area type: 2, 4 and 8

* Filter element replaceable without removing body from system

* Union bonnet design

* Stainless steel 316 and 316L body materials

Particulate Bypass Filters

FT2 Series

* Working pressure up to: 6000 psig (414 bar)

* Working temperature: -28°C to 482°C (-20°F to 900°F)

* End connections: 1/8″ to 3/4″, 6 mm to 12 mm

* End types: tube fitting, male/female NPT, BSPT, BSPP, metric thread

* Element nominal pore size: 0.5, 2, 7, 15, 40, 60, 80, 100, 150, 250 and 450 μm

* Sintered and Strainer element types for options

* Filtration area type: 2, 4 and 8

* Bypass port at filter bottom for the ease of sampling or purging

* Union bonnet design

* Stainless steel 316 and 316L body materials

Inline Filters — Particulate Filters

FT3 Series

* Working pressure up to: 3000 psig (207 bar)

* Working temperature: -28°C to 482°C (-20°F to 900°F)

* End connections: 1/8″ to 3/4″, 6 mm to 12 mm

* End types: tube fitting, male/female NPT, BSPT, BSPP, metric thread, MR fitting

* Element nominal pore size: 0.5, 2, 7, 15, 40, 60, 80, 100, 150, 250 and 450 μm

* Sintered and Strainer element types for options

* Filtration area type: 2, 4 and 8

* Compact and space-saving design

* Stainless steel 316, 316L and brass body materials

All-Welded Inline Filters

FT4 Series

* Working pressure up to: 6000 psig (414 bar)

* Working temperature: -28°C to 482°C (-20°F to 900°F)

* End connections: 1/8″ to 3/4″, 6 mm to 12 mm

* End types: tube fitting, male/female NPT, BSPT, BSPP, metric thread, MR fitting

* Element nominal pore size: 0.5, 2, 7, 15 and 40 μm

* Large filtration area and high flow coefficient

* All-welded construction for elimination of leakage

* Easy cleaning of filters by backflushing, Full-penetration weld between body and filter element

* SS 316, SS 316L and brass body materials